Customizing a Kit
24
3 .
Press a function button to turn the setting on/off.
Screen
Button
Explanation
PAD EQ screen
[F4]
button
Turns pad equalizer on/off.
PAD COMP screen
[F4]
button
Turns pad compressor on/off.
MFX1–3 screen
[F5]
button
Turns on/off the multi-effect
1–3 selected by the
[R1]
knob.
Comparing with or Reverting to the
Unedited Drum Kit (SNAPSHOT)
You can temporarily save the currently-edited drum kit, and compare
it with the current settings or revert back to it (snapshot).
Save temporarily
(STOCK)
Edit
Immediately after
selecting drum kit
(UNDO)
Current drum kit
(CURRENT)
1 .
Select the drum kit that you want to edit.
When you select a drum kit, the data of the selected drum kit is
stored in “UNDO.”
2 .
When you want to temporarily save the settings of
the currently-edited drum kit, press the [SNAPSHOT]
button.
The SNAPSHOT screen appears, and the current drum kit
(CURRENT) is selected.
3 .
Press the [F5] (SAVE) button.
The current drum kit settings are saved in STOCK.
4 .
Press the [EXIT] button to exit the SNAPSHOT screen,
and edit the drum kit.
* When you switch drum kits, the settings saved in STOCK are
deleted.
5 .
Press the [SNAPSHOT] button.
6 .
Use the [F1]–[F3] buttons to switch between the
saved drum kits, and play them to compare.
Button
Explanation
[F1] (CURRENT) button
Current drum kit settings
[F2] (STOCK) button
Drum kit settings saved in STOCK
[F3] (UNDO) button
Settings immediately after selecting the
drum kit
7 .
If you want to return the current drum kit settings
to the state immediately after selecting a drum kit
or STOCK, press the [F2] or [F3] button to select the
drum kit settings to which you want to return.
If you want to continue with the current drum kit settings, press the
[KIT] button to return to the DRUM KIT screen.
8 .
Press the [F4] (RESTORE) button.
A confirmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
9 .
Select “OK” and then press the [ENTER] button.
The current drum kit settings return to the settings of the drum kit
that you selected in step 7.
10 .
Press the [KIT] button to return to the DRUM KIT
screen.
Editing a Drum Kit (MENU)
Here’s how to make settings such as the volume of the drum kit and
the illumination color of the controls.
&
For details on the parameters that can be edited, refer to
“Reference Manual” (PDF).
1 .
In the DRUM KIT screen (p. 15), press the [F5]
(MENU) button.
The menu screen appears.
2 .
Edit the settings of the drum kit.
3 .
Press the [KIT] button to return to the DRUM KIT
screen.
Setting the Volume
Here’s how to set the volume of the drum kit.
1 .
In the DRUM KIT screen (p. 15), press the [F5]
(MENU) button.
2 .
Press the PAGE [UP] button to access the top page.
The KIT SETTINGS screen appears.
3 .
Press the [F1] (VOLUME) button.
4 .
Use the [–] [+] buttons or the dial to edit the value.
Value
-INF–+6.0 dB
