background image

34

Utility Functions

Editing the steps of a set list

3  

Press the [F5] (STEP EDIT) button.

The SETLIST STEP EDIT screen appears.

Set list number

Step number

Drum kit at this step

4  

Use the cursor buttons to select each step, and use the [–] 

[+] buttons or the dial to specify the drum kit at that step.

Button

Explanation

[F4] (DELETE) button

Step at the cursor position is deleted, and 

steps after this point are moved forward one 

place.

[F5] (INSERT) button

The same kit is inserted at the cursor 

position, and steps after this point are moved 

backward one place.

MEMO

If the set list is empty, move the cursor to “END” and use the [–] 

[+] buttons or the dial to specify a drum kit.

5  

Press the [KIT] button to return to the SET LIST screen.

Using Set Lists

Selecting a set list

1  

Press the [SET LIST] button to make it light.

The set list function turns on.

2  

Press the [F1] (

K

 SET LIST) button or [F2] (SET LIST 

J

) button to 

select the set list that you want to use.

Switching drum kits

1  

Use the [–] [+] buttons or the dial to select drum kits in the 

order of the specified steps.

2  

When you’ve finished playing, press the [KIT] button or 

the [EXIT] button to make the [SET LIST] button go dark.

The set list function turns off.

MEMO

 

5

You can assign the appropriate function to a footswitch or 

pad, and use it to recall set lists or drum kits. For details, refer 

to “Assigning Functions to Foot Switches or Pads (CONTROL)” 

(p. 45).

 

5

If there are discrepancies between the volumes of each kit, 

press the [MIXER] button and adjust the Kit Volume (overall 

volume of the entire kit) (p. 22).

Summary of Contents for V-Drums TD-50


















































Reviews: