manualshive.com logo in svg

Roland V-Drums TD-20X, Owner'S Manual

Share
Download
Roland V-Drums TD-20X Owner'S Manual Download Page 75

 

75

 

Chapter 5. Playing Patterns—Sequencer

 

Naming a percussion set [F3 (NAME)]

 

Each percussion set can be named (up to 12 characters).

 

1.

 

In the “PERCUSSION SET EDIT” screen (p. 73), press 

the [F3 (NAME)] button.

 

The “PERCUSSION SET NAME” screen appears.

 

fig.05-017-percname.eps_70

 

2.

 

Use the [CURSOR (left/right)] buttons to move the 

cursor to the character to be changed.

 

3.

 

Use the [VALUE] dial, the [-] [+], or [CURSOR (up/

down)] buttons to change the character.

 

4.

 

Press the [EXIT] button to return to the 

“PERCUSSION SET EDIT” screen.

 

Copying a percussion set

 

You can copy a percussion set from preset memory or from a 

CompactFlash card.

For user memory, you can rearrange the data by exchanging 

the copy-source and copy-destination percussion sets.

 

Be aware that when you execute the copy, the contents 

of the copy-destination will be overwritten.

 

1.

 

Press the [COPY] button.

 

The [COPY] button will light, and the “COPY A” screen will 

appear (p. 91).

If a CompactFlash card (p. 91) is inserted in the CompactFlash 

card slot, the CompactFlash indicator will also light.

 

2.

 

Press the [F5 (A<>B<>C)] button twice to access the 

“COPY C” screen.

 

fig.05-018-copy-c.eps_70

 

3.

 

Press the [F3 (PERC)] button.

 

fig.05-019-perc-copy.eps_70

 

4.

 

Use the [F1]–[F3] buttons to select the copy-source.

 

Function button

[F1 (INSERT)]

 

A blank space is inserted at the cursor 
position.

 

[F2 (DELETE)]

 

Character at the cursor position is deleted.

 

[F3 (SPACE)]

 

Character at cursor position is replaced by 
a blank space.

 

[F4 (CHAR)]

 

Character at the cursor position changes 
between uppercase/lowercase alphabet, 
or numbers and symbols.

 

Function button

[F1 (USER)]

 

Copy from user memory.
Exchanging the copy-source and copy-
destination is possible only if the copy-source 
is user memory.

 

[F2 (PRESET)]

 

Copy from preset memory. 
Choose this if you want to return to the factory 
settings.

 

[F3 (CARD)]

 

Copy from backup data saved on a 
CompactFlash card.

Copy source

Copy destination

TD-20X_e.book 75 ページ ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands