manualshive.com logo in svg

Roland V-Drums TD-20X, Owner'S Manual

Share
Download
Roland V-Drums TD-20X Owner'S Manual Download Page 62

 

62

 

Chapter 4. Effect Settings

 

The multi-effects allow you to further customize your sound 

and also provides a choice of output configurations.

 

1.

 

Press the [MULTI EFFECTS] button.

 

The [MULTI EFFECTS] button lights.

 

fig.04-008-mfx.eps_70

 

2.

 

Use the [F2]–[F4] and [CURSOR] buttons to select 

the parameter.

 

3.

 

Use the [-] [+] buttons or the [VALUE] dial to adjust 

the setting.

 

Pressing the [F5 (H & R)] button in the [F4 (MFX SND)] 

setting screen, you can choose to set the head and rim 

simultaneously or individually.

 

Turning the multi-effects switch on/off

 

1.

 

Press the [MULTI EFFECTS] button.

 

The [MULTI EFFECTS] button will light.

 

2.

 

Press the [F1] button to turn multi-effects on/off.

 

This is the same setting as turning multi-effects on/off in the 

“EFFECTS SWITCH” screen (p. 58).

In the multi-effects edit screen, pressing the [F5 (MFX MON)] 

button will cause the MASTER OUT jacks and PHONES jack to 

output only the sound with multi-effects applied. This is a 

convenient way to audition the effect while you edit the 

settings.

You can use this while setting the [F2 (MFX)] or [F3 (OUTPUT)] 

button.

 

This is a temporary function that works only in the multi-

effects edit screen. It will automatically be defeated 

when you access a different screen.

 

Applying Effects to the Sound 
(Multi-Effects) [MULTI EFFECTS]

 

Parameter

Value

Description

[F2 (MFX)] button

Type

 

REVERB, 
GATE REVERB, 
DELAY, 
PANNING DELAY, 
BEAT DELAY, 
FLANGER, 
PHASER, 
CHORUS, 
ENHANCER, 
PITCH SHIFT, 
OVERDRIVE, 
DISTORTION, 
LO-FI, 
RING MOD

Type of multi-effects

 

Level

 

0–127

Total effect level

 

[F3 (OUTPUT)] button

OutGain 
(dB)

 

0, +6

Boosts the volume of the 
effect.

 

[F4 (MFX SND)] button

Send Level

 

0–127

Effect send level for each 
instrument

 

Auditioning the Multi-Effects 
[F5 (AMB MON)]

TD-20X_e.book 62 ページ ２００９年６月８日　月曜日　午後３時５０分

Summary of Contents for V-Drums TD-20X





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands