Roland V-Drums TD-20X, Owner'S Manual

Page: 100 / 156

100
Chapter 8. Trigger Settings for Each Pad [TRIGGER]
• When Hi-Hat Type is set to “VH11/FD”
Adjusting the offset of VH-11
If you’re using the VH-11 V-hi-hat, execute the offset
adjustment from the TD-20X after making connections.
This adjustment is required in order to correctly detect open,
close, and pedal operations.
1.
Connect the VH-11 and TD-20X.
2.
After making the hi-hat settings, release your foot
from the pedal, and while keeping your foot off the
pedal, turn on the power to the TD-20X.
3.
Loosen the clutch screw and let the hi-hat rest
naturally on the motion sensor unit.
4.
Press the [TRIGGER] button.
5.
Press the [F1 (BANK)] button.
The [TRIGGER] button lights, and the “TRIGGER BANK” screen
appears.
6.
Set the trigger type for hi-hat to “VH11” (p. 96).
7.
Press the [F3 (HI-HAT)] button.
The “TRIGGER HI-HAT” screen appears.
8.
Set the TD-20X’s parameters as described below.
9.
While reading the meter displayed on the right side
of the TD-20X’s screen, adjust the offset with the
VH-11’s VH offset adjustment screw.
Adjust the offset so that the black appear in the meter.
fig.08-010-vh11-offset-2.eps_70
For detailed descriptions regarding the VH-11,
instructions on connections, and other information,
refer to the VH-11 Owner’s Manual.
• When Hi-Hat Type is set to “VH11/FD”
Settings for the VH-11
Parameter Value Description
Foot Splash
Sens -10– +10
(Initial Value: +8)
Amount of how easy to make
the Foot Splash
CC Max
90, 127
(Initial Value: 90)
Amount of Control Change
that is transmitted in stepping
the pedal down completely.
CC
Resolution
NORMAL, HIGH
(Initial Value:
NORMAL)
Amount of Data Resolution
that is transmitted from Hi-
Hat Pedal.
When you control the pitch
by Hi-Hat Pedal (p. 52), the
pitch can be changed
smoothly if you set “High.”
Parameter Value
Hi-Hat Type VH11/FD
Foot Splash Sens +8
CC Max 90
CC Resolution NORMAL
Settings for the FD-8
Parameter Value Description
Foot Splash
Sens -10– +10
(Initial Value: +8)
Amount of how easy to make
the Foot Splash
CC Max
90, 127
(Initial Value: 90)
Amount of Control Change
that is transmitted in stepping
the pedal down completely.
CC
Resolution
NORMAL, HIGH
(Initial Value:
NORMAL)
Amount of Data Resolution
that is transmitted from Hi-
Hat Pedal.
When you control the pitch
by Hi-Hat Pedal (p. 52), the
pitch can be changed
smoothly if you set “High.”
TD-20X_e.book 100 ページ ２００９年６月８日 月曜日 午後３時５０分