Roland V-combo VR-730, Owner'S Manual

Page: 24 / 32

Recording Your Performance
24
Playing a Song
Here’s how to play back a song that you’ve saved on a USB flash
drive.
1.
Connect a USB flash drive (sold separately) to the USB
MEMORY port (p . 4) .
2.
Press the [SONG/RHYTHM] button several times to access
the SONG screen .
3.
Turn the [VALUE] dial to select the song .
MEMO
If you wish to select a song stored in a folder on a USB flash
drive, you can navigate as follows.
• To move to a different folder: Use the [VALUE] dial to select the
“ ,” and then press the [ENTER] button or the [ ]
(START/STOP) button.
• To select a song within the folder: Use the [VALUE] dial.
• To move out of a folder: Use the [VALUE] dial to select the
“ ,” and then press the [ENTER] button or the [ ]
(START/STOP) button.
4.
Press the [ ] (START/STOP) button .
The song will start playing.
The measure number is displayed for SMF-format songs, and the
playback time is displayed for audio-format songs.
5.
Press the [ ] (START/STOP) button .
The song will stop playing.
MEMO
• You can change the playback tempo of SMF format songs (p.
22).
• You can use the DRUM LEVEL [ ] [ ] buttons to adjust the
playback volume (p. 22).
• If the song was recorded on this unit as SMF data, you can use
the LEVEL [ ] [ ] buttons of each section or the [LEVEL] bar to
adjust the volume.
Button operations
[ ] button
Returns to the beginning of the song. If you press
this at the beginning of a song, you’ll move to the
beginning of the preceding song.
Hold down the button to rewind the song.
[ ] button
Moves to the next song. Hold down the button to
fast-forward the song.
[ ] (START/STOP)
button
Play/stop the song.
Renaming a Song
Here’s how to rename a song.
1.
Connect a USB flash drive (sold separately) to the USB
MEMORY port (p . 4) .
2.
Press the [SONG/RHYTHM] button several times to access
the SONG screen .
3.
Turn the [VALUE] dial to select the song .
4.
Press the OCTAVE [UP] button .
The RENAME screen appears.
If you decide to cancel, press the [EXIT] button.
5.
Assign a name to the song .
Button/Dial Operation
CURSOR [ ] [ ] buttons
Select the character that you want
to change.
[VALUE] dial Changes the character.
MODE [ORGAN] (Del) button Delete the character.
MODE [PIANO] (Space) button Inserts a space.
6.
Press the [ENTER] button or the MODE [SYNTH] (Save)
button .
The song will be renamed.
Deleting a Song
Here’s how to delete a song that you’ve saved on a USB flash drive.
1.
Connect a USB flash drive (sold separately) to the USB
MEMORY port (p . 4) .
2.
Press the [SONG/RHYTHM] button several times to access
the SONG screen .
3.
Turn the [VALUE] dial to select the song .
4.
Press the OCTAVE [DOWN] button .
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
5.
Press the [ENTER] button .
The song will be deleted.
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while “Executing...” is displayed.