Roland V-Combo VR-09, Reference Manual

Page: 40 / 65

Using the Looper
40
Saving a Phrase
A phrase you record using the looper can be saved as audio data on
your USB flash drive.
* To save a phrase recorded using the looper, you must first
connect your USB flash drive to the USB MEMORY port.
1.
Stop loop playback (p. 38).
2.
Press the [LOOPER] button.
The SAVE LOOPER screen appears in the display.
If you don’t want to save the phrase to a USB flash drive, press the
[EXIT] button to exit the SAVE LOOPER screen.
MEMO
Even if you exit the looper without saving, the phrase will
remain in this unit’s memory until you turn off the power.
3.
Assign a name to the phrase.
Button/Dial Operation
CURSOR [ ] [ ]
buttons
Select the character that you want to change.
[VALUE] dial Changes the character.
MODE [ORGAN] (Del)
button
Delete the character.
MODE [PIANO] (Space)
button
Inserts a space.
4.
Press the [ENTER] button or the MODE [SYNTH] (Save)
button.
The phrase will be saved.
* An identically-named phrase exists on the USB flash drive, you
won’t be able to save.
If the following screen appears, press the [ENTER] button and
assign a different name.
NOTE
Do NOT turn off the power or disconnect the USB flash drive
while “Executing...” is displayed.