Roland V-Card VC-1, Owner'S Manual

Page: 76 / 156

76
Tone Parameters
TVF MOD
fig.09-45(LCD_ModTvfMod)
LFO (LFO Select)
Selects the LFO that changes cutoff point periodically (creating
growl effects).
Value: +1, -1, +2, -2, +3, -3
fig.09-25e(LFO Select)
LFOD (LFO Depth)
Sets the depth of a growl effect. Higher values deepen the effect.
Value: 0–100
After (Aftertouch Range)
Sets the sensitivity of the aftertouch that controls the cutoff point. “ - ” values lower the cutoff point by
stronger Aftertouch, and “ + ” values raise it.
Value: -7–+7
MOD (Modulation)
Display LFO (Phase)
+1 LFO-1 (+)
-1 LFO-1 (-)
+2 LFO-2 (+)
-2 LFO-2 (-)
+3 LFO-3 (+)
-3 LFO-3 (-)
Positive Phase (+)
Negative Phase (-)
vc1_e.book 76 ページ ２００４年４月２日 金曜日 午後３時２１分