Roland V-Card VC-1, Owner'S Manual

Page: 31 / 156

31
Applying Effects to the Sound
The Chase Play function makes it possible to output the Lower Tone slightly later than the Upper Tone,
which is actually played on the keyboard. This function, however, is only available in
Dual or Whole Key
Mode.
fig.05-17(LCD_PatchEditControl/Chase)
Mode (Chase Mode)
Sets how tones sound. Depending on the Chase Level and
Velocity , the number of repeats of the delayed sound differ.
Value: UL, ULL, ULU
• When the Key Mode is Dual
• When the Key Mode is Whole
Level (Chase Level)
Sets the volume of the chase sound.
Value: 0–100
Time (Chase Time)
Adjusts the sounding time. Higher value is longer time.
Value: 0–100
CHASE
Display Function
UL The Upper Tone then the Lower Tone is played.
ULL The Upper, then the Lower Tone is repeated.
ULU
The Upper, the Lower and the Upper Tone
alternate.
Display Function
UL The Upper Tone is played twice.
ULL
Upper Tone is repeated.
ULU
Upper Tone is repeated.
vc1_e.book 31 ページ ２００４年４月２日 金曜日 午後３時２１分