100
Applying Effects to the Sound
*
Poly Mode
or
Mono Mode
is another element that determines how to output the UPPER and LOWER Tones.
fig.12-21
Split Point
The Split Point can be changed as follows.
Value:
C2 – C7
fig.05-14e
fig.12-23
Partial Mute
When editing a Partial parameter, nay Partial sound can be
muted.
Value (left side):
L1, L2, U1, U2
Value (right side):
Off, On
Display
Description
Whole
Upper Tone can be played in 16 voice polyphony
Dual
Both Upper and Lower Tones are played by each key in 8 voices polyphony.
Split
The Split mode divides the keyboard into upper and lower sections, where two different Tones
can be played in 8 voices polyphony. That is, the VC-1 works like two 8 voice synthesizers. The
Split Point
(where the keyboard is divided into two sections) is shown next to the Key Mode
indication.
Separate
This mode is effective when an external MIDI device is controlling the VC-1.(
Whole-S
(Whole Solo)
The Upper Tone is monophonic.
Dual-S
(Dual Solo)
Both Upper and Lower Tones are monophonic.
Split-US
(Split Upper Solo)
The Upper Tone is monophonic, and the Lower Tone is 8 voices polyphonic.
Split-LS
(Split Lower Solo)
The Lower Tone is monophonic, and the Upper Tone is 8 voices polyphonic.
Separate-S
(Separate Solo)
This mode is effective when an external a MIDI device is controlling the VC-1. (
C2–B2
C3–B3
C4–B4
C5–B5
C6–B6
C7
(middle C)
vc1_e.book 100 ページ 2004年4月2日 金曜日 午後3時21分
Summary of Contents for V-Card VC-1
Page 154: ...154 Index vc1_e book 154...