Roland V-Bass 04672434 Owner'S Manual Download

Page: 83 / 184

Chapter 7 Other Functions

Chapter 7

You can set user patches to their initial conditions, with all effects
switched off.

This is convenient when you want to create a patch from scratch.

You cannot initialize preset patches.

Confirm that a User patch is selected.

Press [WRITE].

Press PAGE [

] to go to Page 3.

The PATCH INITIALIZE screen appears.

“INITIALIZE” is displayed, and the number and name of the
patch to be initialized are indicated.

Use the PATCH/VALUE dial to select the patch
you want to initialize.

Press [WRITE] again.

The message “NOW INITIALIZING...” is displayed as the VB-
99 switches to the patch to be initialized, then the Play screen
returns.

If you do not want to initialize the patch, press [EXIT] to return to the
Play screen.

Go to the settings screen for the parameters
whose settings you want to copy.

Press PAGE [

] several times to go to the

last page.

Use [F1] (SELECT) or the F1 knob to select A/B
COPY.

Press [F6] (EXEC) to copy the settings.

If you want to save the edited settings,
perform the Write procedure (p. 34).

If you do not want to save, press [EXIT] to return to the Play screen.

Go to the settings screen for the parameters
whose settings you want to exchange.

Press PAGE [

] several times to go to the

last page.

Use [F1] (SELECT) or the F1 knob to select A/B
EXCHNG.

Press [F6] (EXEC) to exchange the settings.

If you want to save the edited settings,
perform the Write procedure (p. 34).

If you do not want to save, press [EXIT] to return to the Play screen.

Initializing User Patches
(PATCH INITIALIZE)

Copying Settings Between Channel
A and Channel B (A/B COPY)

Exchanging the Channel A and
Channel B Settings
(A/B EXCHANGE)

VB-99_e.book 83 ページ２００８年８月１８日　月曜日　午後１時１０分

Summary of Contents for V-Bass 04672434

























































































































































































Search results

Summary of Contents for V-Bass 04672434

Reviews:

Related manuals for V-Bass 04672434

Brands by name

Popular brands

Roland V-Bass 04672434, Owner'S Manual

Search results

Summary of Contents for V-Bass 04672434

Reviews:

Related manuals for V-Bass 04672434

Brands by name

Popular brands