Roland V-Bass 04672434, Owner'S Manual, Page: 24 / 184

24
Chapter 1 Outputting Sounds
• [F6] (MUTE OFF, MUTE ON)
This setting determines whether sounds from the output
jacks are output or not while tuning is in progress.
4.
Play a single note, open, on the string being
tuned.
5.
Tune the string until the name of the string is
shown in the display.
When you choose the MULTI MODE
fig.01-060d
When you choose the SINGLE MODE
fig.01-060d
6.
Keep checking the screen, tuning until the
center indicator lights up.
Repeat Steps 3-5 to tune all the strings.
7.
When you have finished tuning, press
[TUNER] or [EXIT].
This completes the preparations for playing
the instrument. Now try playing some sounds.
Patch numbers and patch names are indicated in the Play screen as
shown below.
fig.01-060d
Patches are categorized into User patches and Preset patches.
User Patches
These include 200 preprogrammed patches. You can freely change
the tones and save the your changes.
Preset Patches
Included here are 200 preprogrammed patches. Although you can
make changes to these tones, you cannot save these changes in a
Preset Patch. If you want to save a changed tone, save it as a User
patch.
TUNER Explanation
MUTE OFF Sounds are output during tuning.
MUTE ON
Sounds are not output during tuning.
* With the factory settings, this is set to
MUTE ON.
Switching Tones (Patch)
About the Patch Numbers
What is a patch?
The VB-99 provides 400 memory locations where settings
determining the sound, including those for COSM basses,
COSM amps, and effects, as well as settings for a variety of
other parameters are stored.
Each one of these is called a patch.
Each time you switch a patch, you can instantly change to a
different tone.
Patch Number
Patch Name
VB-99_e.book 24 ページ ２００８年８月１８日 月曜日 午後１時１０分