11.11 Bass Reg. on current Set (Advanced)
V-Accordion
r
101
The possibilities depend on the choice you made in
step (2) above.
Note:
Reeds that are currently off (see “2.2 Register” on
p. 66) adopt the new setting but are not switched on by
this operation.
(4) Press
[EXIT÷JUMP]
twice to return to the main page
and try out all 14 Treble registers.
(5) If you like your new settings, save them (see
11.11 Bass Reg. on current Set
This is an environment in its
own right that has the same
functionality as “Treble Reg.
on current Set”. It applies to
the Bass registers of the cur-
rently selected Set, however.
(1) Select the Set whose Bass registers you want to
edit simultaneously.
(2) Press the
[DATA÷ENTER]
knob and rotate it to select
the parameter to be edited for all Bass registers.
The possibilities are:
Reed
: Reed ALL, Reed 16’, Reed 8’, Reed 8’-4’, Reed 4',
Reed 2’
Volume
: Vol ALL, Vol 16’, Vol 8’, Vol 8'-4’, Vol 4’, Vol 2’
Others
: Noise, Noise Vol, Reed Growl, Growl Vol
If you selected “Reed ALL” or “Vol ALL”, the following
warning may be displayed:
This only occurs if the “VALUE” next to it is currently
“---”, which means that the reeds of your Set use dif-
ferent settings. By proceeding with “ALL”, you would
assign the same value to all registers of the current
Set.
(a) Press the
[DATA÷ENTER]
knob to set the same value
for all reeds.
(b) Press the
[EXIT÷JUMP]
button to stop the operation
(3) Press the
[DATA÷ENTER]
knob to select “VALUE”,
then rotate the
[DATA÷ENTER]
knob to
select
the
desired setting.
The possibilities depend on the choice you made in
step (2) above.
Note:
Reeds that are currently off (see “3.2 Register” on
p. 71) adopt the new setting but are not switched on by
this operation.
(4) Press
[EXIT÷JUMP]
twice to return to the main page
and try out all 7 Bass registers.
(5) If you like your new settings, save them (see
11.12 FreeBass Reg. on current Set
This page allows you to set six
parameters for all Free Bass
registers of the currently
selected Set simultaneously.
You will notice that it is very
similar to the “Bass Reg. on current Set” parameter
above, except that there are fewer reeds.
(1) Select the Set whose Free Bass registers you want
to edit simultaneously.
(2) Press the
[DATA÷ENTER]
knob and rotate it to select
the parameter to be edited for all Free Bass regis-
ters.
The possibilities are:
Reed
: Reed ALL, Reed 16’, Reed 8’
Volume
: Vol ALL, Vol 16’, Vol 8’
Others
: Noise, Noise Vol, Reed Growl, Growl Vol
Parameter
Setting range
Reed
Bandoneon, I-Folk, I-Folk2, Classic, Cajun,
Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische,
OldItaly, TexMex, Trikitixa, F-Jazz,
Classic3, Bajan
Vol
Off, –40~Std~+40
Noise
Bandoneon, I-Folk, I-Folk2, Classic, Cajun,
Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische,
OldItaly, TexMex, Trikitixa, F-Jazz,
Classic3, Bajan
Noise Vol
Off, –40~Std~+40
Mus. Detune
Off, Dry, Classic, F-Folk, American L,
American H, North_Eur, German L,
D-Folk L, Italian L, German H, Alpine,
Italian H, D-Folk H, French, Scottish
Parameter
Setting range
Reed
Bandoneon, I-Folk, I-Folk2, Classic, Cajun,
Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische,
Trikitixa, F-Jazz, Classic3, Bajan
Vol
Off, –40~Std~+40
Noise
Bandoneon, I-Folk, I-Folk2, Classic, Cajun,
Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische,
Trikitixa, F-Jazz, Classic3, Bajan
Noise Vol
Off, –40~Std~+40
Reed Growl
Bandoneon, I-Folk, I-Folk2, Classic, Cajun,
Jazz, F-Folk, D-Folk, Organetto, F-Folk2,
Classic2, Studio, Tradition, Steierische,
Trikitixa, F-Jazz, Classic3, Bajan
Growl Vol
Off, –40~Std~+40
FR-7x GB.book Page 101 Tuesday, August 25, 2009 10:58 AM
