Roland V-4EX, Owner'S Manual

Page: 54 / 64

54
Appendices
Effects that Can Be Controlled by the [CONTROL] Dial
If you have assigned an effect that has an “*“ (asterisk) following its effect name, you can use the [CONTROL] dial to modify the
following settings. The EFFECTS button whose settings can be modified will flash.
No. Effect name Setting controlled by the [CONTROL] dial
011 STROBE* Change the spacing at which the still images will be output (nine levels).
016 AFTERIMAGE* Change the time that the afterimage is shown (four levels).
021 FEEDBACK* Change the strength of the effect over four levels.
022 SHAKE1*
Adjusts the speed at which the image will shake. :
026
SHAKE6*
031 NEGATIVE* Change the portion that is inverted (Invert brightness and color > Invert color > Invert brightness >).
040 COLORIZE] Change the colorization pattern (eight types).
049 FINDEDGE] Smoothly changes the color of the outline edge and background.
058 SILHOUETTE] Smoothly changes the color applied to the image.
067 MONOCOLOR] Smoothly changes the color of the color filter.
076 EMBOSS] Smoothly changes the color applied to the image.
081 POSTERIZE] Change the strength of the effect (four levels).
090 COLORPASS] Change the color that remains (eight types).
092 W-LUMIKEY] Change the white luminance level.
094 B-LUMIKEY] Change the black luminance level.
096 CHROMAKEY] Change the chromakey level.
100 FLIP] Change the direction in which the image is flipped (Flip left/right/top/bottom > Flip top/bottom > Flip left/right >).
108 MULTI-H] Change the pattern by which the image is divided vertically (seven types).
116 MULTI-V] Change the pattern by which the image is divided horizontally (seven types).
124 MULTI-HV] Change the pattern by which the image is divided horizontally and vertically (seven types).
129 MIRROR-H] Change the pattern by which the image is divided vertically (four types).
134 MIRROR-V] Change the pattern by which the image is divided horizontally (four types).
139 MIRROR-HV] Change the pattern by which the image is divided horizontally and vertically (four types).
148 PinP]
Changes the position (eight types) of the subscreen.
* The position of the subscreen will reflect the [142: PinP1] -- [149: PinP8] settings.