V-44SW MIDI Implementation
7
■
Settings Transmitted/Received Using MIDI
●
MIDI Tx Channel
This sets the V-44SW’s MIDI Transmit channel.
The factory default setting is 1.
●
MIDI Rx Channel
This sets the V-440SW’s MIDI Receive channel.
The factory default setting is 1.
The values 0 - 16 can be set via MIDI, which correspond to 1-16 and OFF.
●
MIDI Out/Thru Switch
This sets the MIDI Out.
The factory default setting is OUT.
●
V-LINK Switch
This sets the V-LINK ON/OFF.
The factory default setting is OFF.
●
Device ID
This sets the ID for distinguishing devices when System Exclusive messages are received.
The factory default setting is 10H.
●
TAKE Switch
This controls the TAKE Switch.
This is assigned to CC#09 at the factory.
When arriving via MIDI, the values 0 - 63 are invalid, while 64 - 127 correspond to ON.
●
Transition Pattern
This selects the transition pattern.
This is assigned to CC#10 at the factory.
Values 0 - 5 correspond to CUT, MIX, and WIPE 1 - 4.
●
Transition Time
This selects the transition time.
This is assigned to CC#12 at the factory.
Values 0 - 127 correspond to 0.0 seconds to 4.0 seconds.
●
Video Fader
This controls the VIDEO FADER.
The factory default setting is OFF.
Values 0-127 set with MIDI correspond to PGM - PRESET.
●
Key Switch
This controls the Key Switch.
This is assigned to CC#13 at the factory.
Values 0 - 63 set with MIDI correspond to OFF; values 64-127 correspond to ON.
●
P in P Switch
This controls the P in P Switch.
This is assigned to CC#14 at the factory.
Values 0 - 63 set with MIDI correspond to OFF; values 64-127 correspond to ON.
●
Panel Preset Switch
This controls the Panel Preset Switch.
This is assigned to CC#17 at the factory.
Values 0 - 15 set with MIDI correspond to Preset...Preset15, Factory Preset.
●
OutputFormat Switch
This controls the Output Format Switch.
This is assigned to CC#18 at the factory.
Values 0 - 2 set with MIDI correspond to Output Format1, Output Format2, Output
Format3.
●
Fade Switch
This controls the FADE Switch.
This is assigned to CC#19 at the factory.
Values 0 - 63 set with MIDI correspond to OFF; values 64 - 127 correspond to ON.
●
Fade Level
This controls the FADE.
This is assigned to CC#20 at the factory.
Values 0 - 127 set with MIDI correspond to FADE OUT(Black) - 100%.
■
Factory Setting of V-LINK
The factory setting of V-LINK (receipt of V-LINK ON message only) is as follows.
+——————————————————————+———————————+————————————+
| Parameter | Assign | Value |
+——————————————————————+———————————+————————————+
| Rx Channel | - | 1 |
| Tx Channel | - | 1 |
| Input Channel | - | SD VIDEO 1 |
| TAKE Switch | OFF | - |
| Transition Pattern | OFF | Mix |
| Transition Time | cc#5 | 0.0sec |
| Video Fader | OFF | 0 |
| Key Switch | OFF | OFF |
| PinP Switch | OFF | OFF |
| Panel Preset Switch | OFF | OFF |
| OutputFormat Switch | OFF | 1 |
| Output Fade Mode | - | Auto |
| Fade Switch | OFF | - |
| Fade Level | OFF | MAX |
+———————————————————————————————————————————————+
* When V-LINK is off, V-LINK message will be ignored.
* The changes of setting done while V-LINK is on will not be saved.
* When switching from V-LINK ON to OFF, the MIDI transmit/receive settings revert to
the settings that were in effect before V-LINK was switched on.
