manualshive.com logo in svg

Roland V-40HD, Owner'S Manual, Page: 34 / 60

Share
Download
Roland V-40HD Owner'S Manual Download Page 34

34

Compositing Using Picture-in-Picture

This composites an inset screen into background video. Here below is the procedure to composite in PGM/PST mode.

fig.PinP-image.eps

Inset Screen

Picture in Picture

Background

1.  Select the background channel.

Use the buttons (1 through 4) in the [A-BUS/PGM] section to select the background channel.
* If you want to use a plain colored background, select [BACKGROUND] in the [A-BUS/PGM] section. The default setting is black.

fig.background-select.eps

2.  Select the channel of the inset screen.

Use the buttons (1 through 4) in the [B-BUS/PST] section of input selectors to select the channel of the inset screen.

fig.inset-screen-channel.eps

3.  Preview the results of compositing.

Press one of the PinP selector buttons (1 through 4). The pressed button lights up in green. Pressing the button lets you preview the 
results of compositing. Select the [PST] in PVW selector displays a preview of the composition on the preview monitor.
* At this stage, the composition result is only output to the preview monitor. The final output has not yet been changed.

fig.PinP-preview.eps

Inset

Screen

Background

Compositing the Video

Summary of Contents for V-40HD





























































Reviews:

No comments