Roland V-160HD, Reference Manual

Page: 69 / 111

69
Other Functions
Using an Expression Pedal
You can use an expression pedal connected to the CTL/EXP 1 and 2 jacks to control the V-160HD with your foot.
Adjusting the Pedal (Pedal Calibration)
The first time you use an expression pedal, you must calibrate (adjust)
the pedal so that it will operate optimally.
In some cases, an expression pedal might no longer operate
optimally due to the passage of time or changes in the operating
conditions. If you notice problems such as slight movements of the
pedal causing a major change in volume, or if the video fails to switch
when you press the pedal, you should execute calibration.
1 .
[MENU] button
Ó
“CTL/EXP”
Ó
“CTL/EXP 1” or “CTL/EXP 2”
Ó
select “CTL/EXP TYPE,” and press the [VALUE] knob.
2 .
Set the connected device to “EXP” (the expression pedal)
using the [VALUE] knob, and press the [VALUE] knob.
3 .
Use the [VALUE] knob to select “EXP CALIBRATE,” and
press the [VALUE] knob.
EXP CALIBRATE screen appears.
4 .
As directed by the screen, step on the pedal in the fully
heel-down position, and press the [VALUE] knob.
5 .
As directed by the screen, step on the pedal in the fully
toe-down position, and press the [VALUE] knob.
When the “COMPLETE” indication appears, calibration is completed.
6 .
Press the [MENU] button to close the menu.
MEMO
You should normally use the EV-5 with its minimum volume
knob left in the zero position. If you change the position of the
minimum volume knob, you must execute pedal calibration.
Assigning a Function to the Pedal
You can assign various functions to the expression pedal.
1 .
[MENU] button
Ó
“CTL/EXP”
Ó
“CTL/EXP 1” or “CTL/EXP 2”
Ó
select “CTL/EXP TYPE,” and press the [VALUE] knob.
2 .
Set the connected device to “EXP” (the expression pedal)
using the [VALUE] knob, and press the [VALUE] knob.
3 .
Use the [VALUE] knob to select EXP “CATEGORY” and
“VALUE,” and press the [VALUE] knob.
4 .
Use the [VALUE] knob to select the function that you want to
assign to the expression pedal, and press the [VALUE] knob.
Á
CATEGORY
Value Explanation
N/A No function is assigned.
VIDEO FADER
FADE:
Operates the video fader.
Ç
CUT
É
:
Switches the video between PGM/A bus and
PST/B bus as a cut.
STILL OUTPUT
Pauses the normal output, and previews or
final outputs a cut of the still image.
AUDIO INPUT LEVEL Adjusts the input volume.
AUDIO OUTPUT LEVEL Adjusts the output volume.
VOICE CHANGER MIX
Adjusts the balance between the unprocessed
voice (0) and the voice processed by the effect
(100).
REVERB LEVEL
Adjusts the amount of sound that is returned
from the reverb (return level).
Á
VALUE
Configures the detailed settings related to “CATEGORY.”
5 .
Press the [MENU] button to close the menu.