59
Other Functions
Running the Sequencer
Press the button to make the functions recorded in the sequencer
execute one at a time.
1 .
Long-press the SEQUENCER [ON] button to turn the
sequencer function on (the button lights up).
The list of operations recorded in the sequencer is shown.
Long-press
2 .
Press the [NEXT] button.
The first function in the list is executed.
The button blinks while the function is executing. When the
function ends, the button remains lit.
3 .
Press the [NEXT] button at the timing when you want the
next function to execute.
The function is executed.
[PREVIOUS] button
Press the [PREVIOUS] button if you want to return to the state at
which the previous function was completed.
4 .
Repeat step 3.
5 .
Long-press the SEQUENCER [ON] button again to turn the
sequencer function off.
MEMO
Repeatedly executing a function in the list
You can repeatedly execute functions that are in a list. Once the
last function is finished, press the [NEXT] button to execute the
function at the beginning of the list.
Use the [MENU] button
Ó
“SEQUENCER”
Ó
and set “REPEAT
EXECUTE” to “ON.”
Executing a function from the middle of the list
Use the [VALUE] knob to select a function from the list, and
then press the [VALUE] knob to set the selected function to its
completed state. You can press the [NEXT] button to execute the
next function afterwards.
