52
Other Functions
Executing a Macro
Using the buttons (Macro 1–10)
1 .
Press the [MODE] button several times to select “MACRO.”
Lit orange
2 .
Press the MACRO button corresponding to the number of
the macro you wish to execute.
Orange: Macros with a recorded function
Unlit:
Macros without a recorded function
This executes the macro.
Using the menus
1 .
[MENU] button
Ó
“MACRO”
Ó
select “EXECUTE,” and
press the [VALUE] knob.
2 .
Use the [VALUE] knob to select the macro (1–100) that
you want to execute, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 .
Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The macro is executed.
4 .
Press the [MENU] button to close the menu.
MEMO
Using the cross-point buttons to select macros
When “MACRO” is selected on the [MODE] button, the cross-point
buttons function as macro selection buttons.
Use the [MENU] button
Ó
“MACRO”
Ó
and set “NUMBER OF
MACRO SW” to “30.”
Changing the macro assigned to a button
You can change the macros assigned to the buttons.
From the [MENU] button
Ó
“MACRO”
Ó
“SW ASSIGN,” specify
a macro (1–100) to assign to the respective button, using the
menu items shown below.
Menu item
Explanation
MACRO 1–10
MEMORY [1]–[10] buttons
PGM/A 1–10 (
*1)
PGM/A [1]–[10] buttons
PST/B 1–10 (
*1)
PST/B [1]–[10] buttons
(*1) This can be set if “NUMBER OF MACRO SW” is “30.”
