Roland V-160HD Reference Manual Download Page 4

Page: 4 / 111

Panel Descriptions

Top Panel

AUDIO MIXER

SIG/PEAK indicators (1, 2, 3/4)

Shows the volume level for the AUDIO IN 1, 2, or 3/4.

Indicator Status
Red

Volume is excessive (0 dB or higher)

Yellow

Volume is appropriate (-20 – -1 dB).

Green

Volume is insufficient (-50– -21 dB).

AUDIO INPUT LEVEL [1] [2] [3/4] knobs

Adjust the volume of the AUDIO IN 1, 2, or 3/4.

[AUTO MIXING] button

Turns the auto-mixing function (used to automatically control the

volume) on/off.

SIG/PEAK indicators (AUX, USB STREAM)

Shows the volume level for the AUX bus and USB output.

[AUX] knob

Adjusts the volume of the AUX bus output.

[USB STREAM] knob

Adjusts the volume of the USB output.

[MASTER OUTPUT] knob

Adjusts the overall volume.

Level meter

Indicates the volume level of the overall output.

[CAPTURE IMAGE] button

Turns the still image capture mode on/off.

USER [1]–[4] buttons

These buttons execute pre-assigned functions.
With the factory settings, the following functions are assigned.

Button

Explanation

USER [1]

FREEZE

Turns the freeze function (freeze the input video) on/off.

USER [2]

AUTO SWITCHING

Turns the auto switching function (used to automatically

switch between videos) on/off.

USER [3]

REC CONTROL

Controls the recorder’s video record start/stop if a recorder

that supports REC control functionality is connected.

USER [4]

CAMERA CONTROL

Turns the camera control function on/off.
When this is on (lit), the

CAMERA PRESET [1]–[10]

buttons are used to recall the presets.

PinP & KEY 1–4

This uses PinP and KEY 1–4 layers to composite video using PinP,

or picture-in-picture (p. 28).

[POSITION H] knob

Adjusts the horizontal position of the inset screen.
By turning the knob while pressing it, you can adjusts the size of

the inset screen.

[POSITION V] knob

Adjusts the vertical position of the inset screen.
By turning the knob while pressing it, you can adjust the zoom of

the video shown in the inset screen.

[SOURCE] button

When this is on (lit), you can select the video source for the inset

screens using the

PinP & KEY SOURCE [1]–[10] buttons.

[PVW] button

Turns the inset screen preview output on/off.

[PGM] button

Turns PinP composition on/off.

Summary of Contents for V-160HD
















































































































Search results

Summary of Contents for V-160HD

Reviews:

Related manuals for V-160HD

Brands by name

Popular brands

Roland V-160HD, Reference Manual

Search results

Summary of Contents for V-160HD

Reviews:

Related manuals for V-160HD

Brands by name

Popular brands