22
Video Operations
Loading a Still Image
You can load a still image, and output it in the same way as video (p. 25) or use it as a source for DSK compositing (p. 30). There are two ways
to load a still image: you can load from a USB flash drive, or you can capture from input video.
You can save up to sixteen still images in the unit.
* When still images are saved in the unit, startup takes longer time according to image size and the number of still images saved.
Loading a Still Image from a USB Flash Drive
Here’s how to load a still image from a USB flash drive into the unit.
NOTE
¹
Still images cannot be scaled. In advance, you must prepare
still images of the resolution that is appropriate for your
output format.
¹
When using a USB flash drive for the first time, you must
format it using the V-160HD (p. 64).
¹
Never turn off the power or remove the USB flash drive while
the message “PLEASE WAIT” is shown.
¹
Depending on the USB flash drive, recognition of the flash
drive might take some time.
Formats supported for loading
Format
Bitmap File (.bmp), 24-bit color, uncompressed
PNG file (.png), 24-bit color
* Alpha channel supported
JPEG File (.jpg), 24-bit color
Resolution
In conformity with system format
File name
No more than 64 single-byte alphanumeric characters
* The extension “.bmp,” “.png,” or “.
jpg”
must be added.
Loading a still image
1 .
Save the still image in the root directory of the USB flash
drive.
2 .
Connect the USB flash drive containing the still image to
the USB MEMORY port.
3 .
[MENU] button
Ó
“STILL IMAGE”
Ó
select “LOAD FROM
USB MEMORY,” and press the [VALUE] knob.
A “ ” symbol is displayed
for memory where a still
image is already saved.
4 .
Use the [VALUE] knob to select the loading destination for
the still image (STILL 1–16), and press the [VALUE] knob.
A list of the still images in the USB flash drive is shown.
5 .
Use the [VALUE] knob to select the still image file you
want to load, and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 .
Use the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The still image is loaded into the unit. When the operation is
finished, the message “COMPLETE” appears.
* Large-size still-image files and PNG files might take some time to
load.
7 .
Press the [MENU] button to close the menu.
MEMO
You can set the method of saving still images to “temporarily save.”
When you turn off the power, the loaded still image is deleted.
From the [MENU] button
Ó
“STILL IMAGE,” set “SAVE TO
INTERNAL STORAGE” to “DISABLE,” and then load the still image.
