Roland TrueVIS SG3-300, User Manual

Page: 242 / 327

The [When output, cleaning, and other operations are completed, discard the discharged fluid.] mes-
sage appears when a certain amount of discharged fluid has collected in the bottle. If this message ap-
pears, dispose of the discharged fluid.
Procedure
1.
When the message [When output, cleaning, and other operations are completed, discard the discharged
fluid.] appears, tap [OK].
2.
Tap to display the notification.
3.
Tap the following notification.
The [Drain Bottle] screen appears.
You can dispose of discharged fluid even if the above message has not appeared.
Use the following operations to display the drain bottle screen, and then dispose of discharged fluid according
to the procedure starting from step 4.
1. Tap .
2. Tap [Maintenance]>[Drain Bottle].
MEMO
4.
Tap [Execute].
5.
Remove the drain bottle and discard the discharged fluid.
If the Discharged Fluid Disposal Message Ap-
pears
Disposing of Discharged Fluid
241