Using Media That Wrinkles Easily/Does Not Move Smoothly
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corre-
sponding to the nature and condition of the media.
Procedure
1.
Load the media.
2.
Tap
.
3.
Tap [Media Settings]>[Other Media Settings]>[Media Suction Force].
4.
Tap
or
to enter the value.
0 to 100%
When the media is flimsy and cannot move smoothly, decreasing this value (reduc-
ing the suction force) may correct the problem.
Auto
The suction force is automatically adjusted to the optimal level for the media
width
5.
Tap [Save] to confirm your entry.
6.
Tap
to go back to the original screen.
• Default setting: [Auto]
• Depending on the software RIP you are using, you can also make this setting in the software RIP. When you
have made the setting in the software RIP, the machine's setting is ignored.
MEMO
Configuring Settings to Match the Properties of the Media
156
Optimizing the Output Quality
Summary of Contents for TrueVIS SG3-300
