23
Various Settings
Restoring Data That Was Backed Up to SD Card
(RESTORE)
1.
Press the
[UTILITY]
button.
The UTILITY screen appears.
2.
Use the
[VALUE]
knob to select
“UTILITY: Restore.”
3.
Press the
[ENTER]
button.
The RESTORE screen appears.
4.
Use the
[VALUE]
knob to select the file that you
want to restore.
5.
Press the
[ENTER]
button.
A confirmation message appears.
6.
To execute, use the
[VALUE]
knob to select
“OK,”
and press the
[ENTER]
button.
If you decide to cancel, use the
[VALUE]
knob to select
“Cancel,”
and then press the
[ENTER]
button.
Convenient Functions
(UTILITY)
Here you can make system settings for the TR-8S unit itself, or back-
up and restore data.
1.
Press the
[UTILITY]
button.
The setting screen appears.
2.
Select a parameter.
2-1.
Use the
[VALUE]
knob to select a parameter.
2-2.
Press the
[ENTER]
button.
3.
These are used to modify values.
3-1.
Use the
[VALUE]
knob to edit the parameter value.
3-2.
Press the
[ENTER]
button.
Return to the parameter selection (step 2).
4.
Press the lit
[UTILITY]
button.
The
[UTILITY]
button goes dark, and you exit the UTILITY screen.
Utility
Category
Explanation
GENERAL
Makes overall settings for the entire TR-8S.
RELOAD
Returns the selected pattern or kit to the last-
saved state.
SAMPLE
Imports or deletes samples.
LED
Adjusts the brightness of the button or slider
LEDs.
SYNC/TEMPO
Makes synchronization-related settings.
MIDI
Makes MIDI-related settings.
SOUND
Specifies the local control setting.
MIX OUT
Makes settings for the MIX OUT jack output.
ASSIGN OUT
1–6
Make settings for the ASSIGNABLE OUT/
TRIGGER OUT 1–6 jack output.
EXT IN
Makes settings for the input signal from the
EXT IN jack.
UTILITY
Backs-up or restores.
SD CARD
Formats an SD card.
INFORMATION
Displays the version of the system program.
&
For details, refer to
“Reference Manual”
(PDF).