background image

14

Customizing a Drum Kit (KIT EDIT)

Adjusting the Attack and Release 

(TRANSIENT)

Here’s how to emphasize or de-emphasize the attack or 

release portion of the sound. You can adjust this individually 

for each pad.

1  

Press the [ ] (KIT EDIT) button.

2  

Use the [

C

][

A

] buttons to select “TRANSIENT,” 

and press [ ] (ENTER) button.

The TRANSIENT screen appears.

TRANSIENT    SN

 ON/OFF      ONÀ

3  

Strike the pad that you want to make settings.

4  

Use the [

C

][

A

] buttons to select an item 

(parameter) and use the dial to edit the value.

Parameter

Value

Explanation

ON/OFF

ON, OFF

Turns the effect on/off.

Time

1–10

Time over which the sound 

rises (attack)

Attack

-100–100

Attack adjustment

Release

Release adjustment

Gain

-12.0–+6.0dB Volume after transient is 

adjusted

H&R Link

ON, OFF

Selects whether the head and 

rim parameters are edited as 

a set (ON) or independently 

(OFF).

5  

Press the [

] (DRUM KIT) button to return to 

the DRUM KIT screen.

Adjusting the Tonal Character of Each Pad 

(PAD EQ)

Here’s how to adjust the tonal character of each pad (pad 

equalizer).

1  

Press the [ ] (KIT EDIT) button.

2  

Use the [

C

][

A

] buttons to select “PAD EQ,” and 

press [ ] (ENTER) button.

The PAD EQ screen appears.

PAD EQ       SN

 ON/OFF      ONÀ

3  

Strike the pad that you want to make settings.

4  

Use the [

C

][

A

] buttons to select an item 

(parameter) and use the dial to edit the value.

Parameter

Value

Explanation

ON/OFF

ON, OFF

Turns the effect on/off.

LoFrq

20Hz–1kHz

Center frequency of the low 

range

LoGain

-15–+15dB

Amount of boost/cut for the 

low range

MidQ

0.5–8.0

Width of the frequency range
A higher Mid Q narrows the 

affected area.

MidFrq

20Hz–16kHz

Center frequency of the mid 

range

MidGain

-15–+15dB

Amount of boost/cut for the 

mid range

HiFrq

1kHz–16kHz

Center frequency of the high 

range

HiGain

-15–+15dB

Amount of boost/cut for the 

high range

H&R Link

ON, OFF

Selects whether the head and 

rim parameters are edited as 

a set (ON) or independently 

(OFF).

5  

Press the [

] (DRUM KIT) button to return to 

the DRUM KIT screen.

Summary of Contents for TD-07































Reviews: