Roland Studio Canvas SD-80 Owner'S Manual Download

Page: 25 / 128

Using the internal sound generator

Using the internal

sound generator

Selecting the sound set

In GM2 mode you can choose one of four different sound sets. In Native mode you can choose one of six
different sound sets.

fig.5-05

Press

[INST]

The button will light.

fig.5-05a_67.2

Press

[PAGE

]

until the display indicates

Inst Set

Turn the

[VALUE]

dial to select the desired sound set.

CLASSICAL:

Classical

CONTEMPORARY:

Contemporary

SOLO:

Solo

ENHANCED:

Enhanced

SPECIAL 1:

Special 1 (Native mode only)

SPECIAL 2:

Special 2 (Native mode only)

USER:

User (Native mode only)

The sound set has now been selected.

Press

[INST]

once again to return to the main screen.

1,4

sd80_manual_e.book 25 ページ２００４年２月１０日　火曜日　午前１１時５分

Summary of Contents for Studio Canvas SD-80

































































































































Search results

Summary of Contents for Studio Canvas SD-80

Reviews:

Related manuals for Studio Canvas SD-80

Brands by name

Popular brands

Roland Studio Canvas SD-80, Owner'S Manual

Search results

Summary of Contents for Studio Canvas SD-80

Reviews:

Related manuals for Studio Canvas SD-80

Brands by name

Popular brands