![background image](http://html.mh-extra.com/html/roland/ssd-128g/ssd-128g_owners-manual_1481889001.webp)
Owner’s Manual
Connecting to or Disconnecting from the Recording Devices
You can connect the SSD-128G to the Roland R-1000 for use as recording storage.
For connection and disconnection steps, refer to the owner’s manuals for the R-1000.
NOTE
To avoid the risk of damage to internal components that can be caused by static electricity, please
carefully observe the following whenever you handle this drive.
• Before you touch the drive, always first grasp a metal object (such as a water pipe), so you are sure
that any static electricity you might have been carrying has been discharged.
• When handling this drive, grasp it only by the case. Avoid touching any of the electronic
components or connectors.
• Before you connect any cables, make sure they do not carry a static electricity charge. Such
charges can be transmitted, for example, if the other end of the cable has been in contact with a
carpet (or other object) where there is a static electricity buildup.
NOTE
Before the first recording to the SSD-128G, use the recording device (R-1000) to format this drive.
Without formatting process, this drive cannot carry out proper recording. For steps of formatting the
recording drive, refer to owner’s manuals for the R-1000.
Connecting to a Computer
You can copy the recorded data to your computer when the SSD-128G is connected.
* Use the included USB cable for connection.
USB Ports
Accessory USB cable
USB Port
NOTE
When you connect the SSD-128G to your computer, note the following points.
• The USB cable has 2 plugs on one end. Be sure to connect both plugs to the USB ports on your
computer. If you connect one plug only, it may cause the SSD-128G to malfunction because of
limited power (depending on the model of your computer.
• If connecting 2 plugs is difficult because of limited USB ports or space, you can connect via USB
hub. In this case, use a self-powered type (a hub that receives power from an external AC adaptor).
Do not use a bus-powered USB hub. Note too that the SSD-128G may not work properly if it
connected via a bus-powered USB hub - again due to the limited power.
• Do not extend the USB cable. If the SSD-128G is connected to a computer via an extension cable, it
may not work properly.
Operating Systems
SSD-128G supports the Operating Systems as below.
• Windows XP/Vista/7/8
The drive is displayed as [Roland]. You can find it under My Computer or using Explorer.
• Mac OS X
The drive is displayed as [Roland] on the desktop.
Disconnecting from a Computer
When you disconnect the SSD-128G from a computer, follow these steps before
unplugging of the USB cable.
NOTE
Do not disconnect the USB cable before executing these steps. It may cause damage to the recorded
data.
For Windows XP/Vista/7/8
1.
Quit Application
Quit all the applications referencing recorded data on the SSD-128G and close all the
windows.
2.
Select the Safe Disconnection Icon
In the task tray, select the icon representing safe disconnection.
* Icon design differs depending on the operating system.
3.
Select SSD-128G
Select the SSD-128G from the displayed USB devices and wait for the safe disconnection message.
4.
Disconnect USB cable
Disconnect the USB cable that is connecting the SSD-128G with the computer.
For Mac OS X
1.
Trash SSD-128G icon
Drag and drop the SSD-128G icon to the trash located on the right end of the Dock. The trash icon
changes to the image below. Wait a while and confirm that the SSD-128G icon has disappeared from the
desktop.
2.
Disconnect USB cable
Disconnect the USB cable that is connecting the SSD-128G with the computer.
Copyright © 2013 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND
CORPORATION.
*
5
1
0
0
0
3
9
0
6
0
-
0
1
*
Before using this unit, carefully read the sections entitled “USING THE UNIT SAFELY” and “IMPORTANT
NOTES” on back side. These sections provide important information concerning the proper operation
of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature of
your new unit, read Owner’s Manual in its entirety. This manual should be saved and kept on hand as a
convenient reference.