Roland SPD-SX, Owner'S Manual

Page: 59 / 80

O
ver
all S
ettings f
or the SPD
-SX
Overall Settings for the SPD-SX
59
Display and Pad Settings (SETUP)
Here you can make display, pad, and MIDI-related settings for the entire SPD-SX. For the procedure, refer to “Basic Editing
Procedure” (p. 16).
1.
Choose MENU SETUP.
2.
Choose the item that you want to edit.
3.
Edit the parameter.
SETUP screen quick menu
In the SETUP screen, pressing the [QUICK] button will display the following quick menu.
Menu Explanation Page
SETUP INIT Initializes the settings of the Setup parameters. p. 64
Display Brightness and Indicator Settings (LCD/LED)
Here you can adjust the brightness of the display, and specify how the indicators will light.
Parameter Value Explanation
LCD CONTRAST 1–10 Adjusts the contrast of the display.
LCD BRIGHT 1–10 Adjusts the brightness of the display.
PAD INDICATE
Specifies how the pad indicators will light.
OFF The pad indicators will always stay unlit.
DYNAMIC The pad indicators will light according to the volume of the wave being played.
STATE The pad indicators will light only when you play the pad.
ALL ON The pad indicators will always remain lit.
TEMPO INDICATE
Specifies how the TEMPO indicator will light.
OFF The TEMPO indicator will stay unlit.
ON The TEMPO indicator will blink at the tempo.
DISP MODE SUB NAME, LEVEL
Selects whether the sub-name or the level meter will be shown below the kit name in the top
screen.