Roland SP-404MK2 Reference Manual Download

Page: 21 / 136

Playing Back Samples (SAMPLE MODE)

Playing Back Samples in Scale Pitches (CHROMATIC)

You can play back samples (changing their pitches) as a chromatic scale with the pads.

Press pads [1]–[16] to select the sample to use in chromatic mode.

Hold down the [SHIFT] button and press the pad [4].

The unit enters chromatic mode.

Press pads [1]–[16].

The pad position corresponds to the key displayed. The sample plays back in the key that matches the pad you press.

Turn the [VALUE] knob to change the key range.

To exit chromatic mode, press the [EXIT] button.

Changing how the samples play (how they sound)

You can change how samples play when they are triggered.

In chromatic mode, press the [REMAIN] button.

The method switches each time you press the [REMAIN] button.

Method of

playing

[REMAIN]

button

Explanation

LEGATO

Blinks slowly

When you play legato (by pressing a pad while holding down another pad), portamento is

applied.

MONO

Lights up

The sample plays in single-note mode (monophonic).

POLY

Blinks quickly

Pressing multiple pads makes the samples play back at the same time (polyphonic).

Changing the scale/mode

You can change the scale/mode that’s used when you play.

In chromatic mode, press the [VALUE] knob.

The scale/mode changes in the following order each time you press the [VALUE] knob.
Major scale

→

minor scale

→

Dorian mode

→

Phrygian mode

→

major scale

→

...

Hold down the [ROLL] button and turn the [VALUE] knob to select the note (root) for the scale.

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands