Roland SP-404MK2 Reference Manual Download

Page: 131 / 136

Appendix

131

Error Messages

Error messages

Explanation

Action

Battery Low!

The batteries are nearly depleted.

Replace the batteries, or switch to an AC adaptor.

→

“

About the Power Supply

(P.8)”

Unsupported

FILE

The file type is not supported on this unit.

Check the file extension, format and folder directory.

→

“

Importing/Exporting (Using the SD Card)

(P.99)”

No SD CARD!

No SD card is inserted. Also, the SD card

might not be fully inserted.

Turn off the power, and make sure that the SD card is fully

inserted before you turn the power back on.

Unsupported

SD Card!

An unsupported type of SD card has been

inserted.

Please format the SD card.

→

“

Formatting an SD Card

(P.106)”

SD CARD

Protected!

The write-protect feature has been enabled

on the SD card.

Unlock the lock switch on the left side of the SD card.

SD CARD Full!

The SD card has run out of free space.

Delete any unneeded data on the card.

Internal Storage

Full!

There is not enough storage capacity left

on this unit.

Delete any unneeded data on the unit.

Storage Error!

A problem has occurred with the internal

storage.

Try performing a factory reset.

→

“

Restoring the Factory Settings (FACTORY RESET)

(P.107)”

Protected!

The function can’t be executed because

bank protect is enabled.

Use a bank for which bank protect is disabled, or disable bank

protect on the currently selected bank.

→

“

Selecting a Sample Bank

(P.11)” “

Selecting a Pattern

Bank

(P.64)” “

Protecting a Sample (PROTECT)

(P.55)” “

Protecting a

Pattern (PROTECT)

(P.71)”

Max Length

Pattern

The maximum number of notes that can be

recorded to the pattern sequencer has

been exceeded.

Reduce the number of notes in the pattern, or shorten and split

the pattern to record.

→

“

Creating a New Pattern (Real-time Recording)

(P.58)”

“

Creating a New Pattern (TR-REC)

(P.60)”

Summary of Contents for SP-404MK2









































































































































Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands

Roland SP-404MK2, Reference Manual

Search results

Summary of Contents for SP-404MK2

Reviews:

Related manuals for SP-404MK2

Brands by name

Popular brands