1
The VS-100 is compatible with music production software from Apple, including Logic Pro/Express and GarageBand.
After installing the relevant VS-100 control surface plug-in (either the one for Logic Pro/Express or the one for GarageBand) in your Mac, you’ll
conveniently and easily be able to control Logic Pro/Express or GarageBand from your VS-100.
Operating Requirements
•
Operating system: Mac OS X 10.5 Leopard or later
•
Software version: Logic Pro/Express 8 or later, GarageBand ’09 or later
Installation
NOTE
You must install the VS-100 driver before you install the VS-100 Control Surface Plug-in.
1.
If Logic Pro/Express or GarageBand is running, quit such software first.
2.
Double-click “VS-100ControlSurfacePlugin.pkg” and follow the instructions that appear onscreen to perform the installation.
MEMO
After installation, you might see the following control surface setup dialog box when you start up Logic Pro/Express; simply close the dialog box.
Using a VS-100 to Control Logic Pro/Express or
GarageBand
*
Apple, GarageBand, Leopard, Logic, Mac OS X, Mac, and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
*
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
VS-100
