Roland SCB-55, Owner'S Manual, Page: 27 / 33

Address(H) Size(H) Data(H) Parameter Description Default Value (H) Description
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
40 1x 00
00 00 02 00 - 7F TONE NUMBER CC#00 VALUE (0 - 127) 00 0
40 1x 01# 00 - 7F P.C. VALUE (1 - 128) 00 1
40 1x 02 00 00 01 00 - 10 Rx. CHANNEL 1 - 16, OFF Same as the Part Number
40 1x 03 00 00 01 00 - 01 Rx. PITCH BEND OFF / ON 01 ON
40 1x 04 00 00 01 00 - 01 Rx. CH PRESSURE(CAf) OFF / ON 01 ON
40 1x 05 00 00 01 00 - 01 Rx. PROGRAM CHANGE OFF / ON 01 ON
40 1x 06 00 00 01 00 - 01 Rx. CONTROL CHANGE OFF / ON 01 ON
40 1x 07 00 00 01 00 - 01 Rx. POLY PRESSURE(PAf) OFF / ON 01 ON
40 1x 08 00 00 01 00 - 01 Rx. NOTE MESSAGE OFF / ON 01 ON
40 1x 09 00 00 01 00 - 01 Rx. RPN OFF / ON 01 ON
40 1x 0A 00 00 01 00 - 01 Rx. NRPN OFF / ON 00 (01*) OFF (ON*)
* Rx. NRPN is set to OFF by power-on reset or by “Turn General MIDI System On,” and it is set to ON by “GS RESET.”
40 1x 0B 00 00 01 00 - 01 Rx. MODULATION OFF / ON 01 ON
40 1x 0C 00 00 01 00 - 01 Rx. VOLUME OFF / ON 01 ON
40 1x 0D 00 00 01 00 - 01 Rx. PANPOT OFF / ON 01 ON
40 1x 0E 00 00 01 00 - 01 Rx. EXPRESSION OFF / ON 01 ON
40 1x 0F 00 00 01 00 - 01 Rx. HOLD1 OFF / ON 01 ON
40 1x 10 00 00 01 00 - 01 Rx. PORTAMENTO OFF / ON 01 ON
40 1x 11 00 00 01 00 - 01 Rx. SOSTENUTO OFF / ON 01 ON
40 1x 12 00 00 01 00 - 01 Rx. SOFT OFF / ON 01 ON
40 1x 13 00 00 01 00 - 01 MONO/POLY MODE Mono / Poly 01 Poly
(=Bn 7E 01 / Bn 7F 00)
40 1x 14 00 00 01 00 - 02 ASSIGN MODE 0 = SINGLE 00 at x=0 SINGLE at x=0
1 = LIMITED-MULTI 01 at x
≠
0 LIMITED-MULTI at x
≠
0
2 = FULL-MULTI
ASSIGN MODE is a parameter used to select the voice assign manner when “Multiple Note Ons” occur (the same note number on the same channel at the same
time).
The best assign modes (SINGLE (0) for the Drum part and LIMITED-MULTI (1) for the other parts) are selected automatically, so you need not reset this parameter.
40 1x 15 00 00 01 00 - 02 USE FOR DRUM PART 0 = OFF 00 at x
≠
0 OFF at x
≠
0
1 = MAP1 01 at x=0 MAP1 at x
≠
0
2 = MAP2
USE FOR DRUM PART is a parameter to define the part to be used as an ordinary part (0), as a drum part using DRUM MAP1 (1), or a drum part using DRUM
MAP2 (2).
The default is MAP1 (1) for Part 10 (MIDI CH=10, x=0), and all other parts are set to ordinary parts (OFF(0)).
40 1x 16 00 00 01 28 - 58 PITCH KEY SHIFT -24 - +24 [semitones] 40 0 [semitones]
40 1x 17 00 00 02 08 - F8 PITCH OFFSET FINE -12.0 - +12.0 [Hz] 08 00 0 [Hz]
40 1x 18# Use nibblized data.
40 1x 19 00 00 01 00 - 7F PART LEVEL 0 - 127 64 100
(=Bn 07 vv)
40 1x 1A 00 00 01 00 - 7F VELOCITY SENSE DEPTH 0 - 127 40 64
40 1x 1B 00 00 01 00 - 7F VELOCITY SENSE OFFSET 0 - 127 40 64
40 1x 1C 00 00 01 00 - 7F PART PANPOT -64 (RANDOM), 40 0 (CENTER)
-63 (LEFT) - +63 (RIGHT)
(=Bn 0A vv, except RANDOM)
40 1x 1D 00 00 01 00 - 7F KEY RANGE LOW (C-1) - (G9) 00 C-1
40 1x 1E 00 00 01 00 - 7F KEY RANGE HIGH (C-1) - (G9) 7F G9
40 1x 1F 00 00 01 00 - 5F CC1 CONTROLLER NUMBER 0 - 95 10 16
40 1x 20 00 00 01 00 - 5F CC2 CONTROLLER NUMBER 0 - 95 11 17
40 1x 21 00 00 01 00 - 7F CHORUS SEND LEVEL 0 - 127 00 0
(=Bn 5D vv)
40 1x 22 00 00 01 00 - 7F REVERB SEND LEVEL 0 - 127 28 40
(=Bn 5B vv)
40 1x 23 00 00 01 00 - 01 Rx. BANK SELECT OFF / ON 01 (00*) ON (OFF*)
*Rx. BANK SELECT is set to ON by power-on reset or by “GS RESET,” and set to OFF by “Turn General MIDI System On.”
40 1x 30 00 00 01 0E - 72 TONE MODIFY 1 -50 - +50 40 0
Vibrato rate (=Bn 63 01 62 08 06 vv)
40 1x 31 00 00 01 0E - 72 TONE MODIFY 2 -50 - +50 40 0
Vibrato depth (=Bn 63 01 62 09 06 vv)
40 1x 32 00 00 01 0E - 72 TONE MODIFY 3 -50 - +50 40 0
TVF cutoff freq. (=Bn 63 01 62 20 06 vv)
40 1x 33 00 00 01 0E - 72 TONE MODIFY 4 -50 - +50 40 0
TVF resonance (=Bn 63 01 62 21 06 vv)
40 1x 34 00 00 01 0E - 72 TONE MODIFY 5 -50 - +50 40 0
TVF&TVA Env.attack (=Bn 63 01 62 63 06 vv)
40 1x 35 00 00 01 0E - 72 TONE MODIFY 6 -50 - +50 40 0
TVF&TVA Env.decay (=Bn 63 01 62 64 06 vv)
40 1x 36 00 00 01 0E - 72 TONE MODIFY 7 -50 - +50 40 0
TVF&TVA Env.release (=Bn 63 01 62 66 06 vv)
40 1x 37 00 00 01 0E - 72 TONE MODIFY 8 -50 - +50 40 0
Vibrato delay (=Bn 63 01 62 0A 06 vv)
27
SCB-55.QX4 01.6.19 8:59 AM Page 27