Roland SCB-55, Owner'S Manual, Page: 26 / 33

<2> PATCH PARAMETERS
(1) Common Parameters
Patch Common Parameters include VOICE RESERVE, REVERB, and CHORUS parameters. These parameters are common to all the parts.
Address(H) Size(H) Data(H) Parameter Description Default Value (H) Description
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
40 01 10
00 00 10 00 - 18 VOICE RESERVE Part 10 (Drum Part) 02 2
40 01 11# Part 1 06 6
40 01 12# Part 2 02 2
40 01 13# Part 3 02 2
40 01 14# Part 4 02 2
40 01 15# Part 5 02 2
40 01 16# Part 6 02 2
40 01 17# Part 7 02 2
40 01 18# Part 8 02 2
40 01 19# Part 9 02 2
40 01 1A# Part 11 00 0
40 01 : # :
40 01 1F# Part 16 00 0
The sum total of voices in the voice reserve function must be equal to or less than the number of the maximum polyphony.
The maximum polyphony of the SCB-55 is 28.
For compatibility with other GS models, it is recommended that the maximum polyphony be equal or less than 24.
40 01 30 00 00 01 00 - 07 REVERB MACRO 00: Room 1 04 Hall 2
01: Room 2
02: Room 3
03: Hall 1
04: Hall 2
05: Plate
06: Delay
07: Panning Delay
40 01 31 00 00 01 00 - 07 REVERB CHARACTER 0 - 7 04 4
40 01 32 00 00 01 00 - 07 REVERB PRE-LPF 0 - 7 00 0
40 01 33 00 00 01 00 - 7F REVERB LEVEL 0 - 127 40 64
40 01 34 00 00 01 00 - 7F REVERB TIME 0 - 127 40 64
40 01 35 00 00 01 00 - 7F REVERB DELAY FEEDBACK 0 - 127 00 0
40 01 36 00 00 01 00 - 7F REVERB SEND LEVEL TO CHORUS 0 - 127 00 0
REVERB MACRO is a parameter used to select the preset type of the effect.
When set to another REVERB MACRO, all other reverb parameters will be reset to the values set for each type of REVERB MACRO.
40 01 38 00 00 01 00 - 07 CHORUS MACRO 00: Chorus 1 02 Chorus 3
01: Chorus 2
02: Chorus 3
03: Chorus 4
04: Feedback Chorus
05: Flanger
06: Short Delay
07: Short Delay (FB)
40 01 39 00 00 01 00 - 07 CHORUS PRE-LPF 0 - 7 00 0
40 01 3A 00 00 01 00 - 7F CHORUS LEVEL 0 - 127 40 64
40 01 3B 00 00 01 00 - 7F CHORUS FEEDBACK 0 - 127 08 8
40 01 3C 00 00 01 00 - 7F CHORUS DELAY 0 - 127 50 80
40 01 3D 00 00 01 00 - 7F CHORUS RATE 0 - 127 03 3
40 01 3E 00 00 01 00 - 7F CHORUS DEPTH 0 - 127 13 19
40 01 3F 00 00 01 00 - 7F CHORUS SEND LEVEL TO REVERB 0 - 127 00 0
CHORUS MACRO is a parameter used to select the preset type of effect.
When set to another CHORUS MACRO, then all other chorus parameters will be reset to the values set for each type of CHORUS MACRO.
(2) Part Parameters
SCB-55 has 16 parts. The parameters of each part are called Part Parameters.
To send or request Part Parameters, don’t use not the part number (which is usually same as the MIDI channel number) but the BLOCK NUMBER in the message.
x...BLOCK NUMBER (0 - F), Part 1 (default MIDI ch = 1) x=1
Part 2 (default MIDI ch = 2) x=2
: : :
Part 9 (default MIDI ch = 9) x=9
Part10 (default MIDI ch =10) x=0
Part11 (default MIDI ch =11) x=A
Part12 (default MIDI ch =12) x=B
: : :
Part16 (default MIDI ch =16) x=F
n...MIDI channel number (0 - F) of the BLOCK.
26
SCB-55.QX4 01.6.19 8:59 AM Page 26