Roland S-4000M, Owner'S Manual

Page: 21 / 28

21
About the Remote Controller
You can connect a dedicated digital-snake remote controller (S-4000R) to the REMOTE connector.
You can use this to adjust preamp gain and switch phantom power on and off for digital snake devices connected to the
S-4000M. The S-4000R supports control of up to 40 channels.
When the S-4000M is set to THRU mode, the REMOTE connector is inactive.
fig.connect-S4000R.eps
For information on the settings you can control remotely using the S-4000R, refer to the owner’s manuals for the respective
digital snake devices.
Installing dedicated remote control software on a computer and connecting it to the REMOTE connector lets you perform remote
control from the computer. As with the S-4000R, you can use this to adjust preamp gain and switch phantom power on and off for
digital snake devices connected to the S-4000M.
When the S-4000M is set to THRU mode, the REMOTE connector is inactive.
fig.connect-PC.eps
You can download the dedicated remote control software (S-4000 RCS) and the user guide from the following Roland website.
http://www.rolandsystemsgroup.net/
* Refer to the User Guide of S-4000 RCS for details of system requirements and operations.
Connecting a Dedicated Remote Controller
Connecting a Computer
S-4000M_e.book 21 ページ ２０１４年１１月２６日 水曜日 午後４時４分