Roland S-4000M, Owner'S Manual

Page: 18 / 28

18
Connecting Peripheral Devices
When connecting an analog mixer, you can connect an S-4000H or S-4000S-0832 to REAC port A on the S-4000M. Connect the
analog input and output of the S-4000H or S-4000S-0832 to the mixer.
Set REAC mode of the S-4000H or S-4000S connected at REAC port A to “Master.” For information about mode settings and operation in the
various modes, refer to the owner’s manuals for the respective models.
When the S-4000M detects the connected S-4000H or S-4000S and REAC communication starts, the[A] of [LINK] indicator in REAC STATUS flashes.
If this does not flash, try detaching and reconnecting the cables and switching the power on and off.
fig.connect-analog.eps
This example lets you configure a 32-in/8-out system. The number of input channels varies (from 8 to 32 channels) according to
the type and number of digital snake devices connected to REAC ports 1 through 4 on the S-4000M.
The number of output channels remains unchanged at 8.
Connecting an Analog Mixer
STAGE
FOH
S-4000H
S-4000M_e.book 18 ページ ２０１４年１１月２６日 水曜日 午後４時４分