6—Using the S-4000 System
64
S-4000 Digital Snake Owner’s Manual
Using the S-4000R Remote Controller
When the S-4000R is connected to the S-4000 System, you can:
•
control S-4000S input channel functions
—including preamp gain, pad, and phantom power.
•
monitor signal level status of the system’s input channels
—including the presence of signal and
overload (clip).
•
monitor the level of the system’s input channels
—using the eight-segment LED input meter.
•
monitor system status
—using the various indicators on the S-4000R panel.
•
store and recall
—10 different sets of S-4000S channel settings
To facilitate custom labeling for a particular installation or multiple S-4000 Systems, the S-4000S
is shipped from the factory without channel number labels on its input modules. See
Appendix B:
Connector Information
for an illustration that identifies the S-4000S’s input channels for channel
selection on the S-4000R.
When the S-4000R is connected to a unit set as a Split REAC device, only system and signal level
monitoring is possible. See Chapter 7 for more about split setups.
In the following sections, we’ll show you how to use the S-4000R’s functions. Before proceeding, make
sure that the S-4000R is connected to the S-4000S or S-4000H as described on Page 55.
Lock Mode
The S-4000R has a Lock mode that blocks the editing of S-4000S input
channels. This protects the current channel settings from accidental changes
during a live performance.
•
To lock the S-4000R
—press LOCK so its indicator lights. When locked,
S-4000S channel settings cannot be adjusted.
•
To unlock the S-4000R
—press and hold LOCK until its indicator goes out
(approximately 1.5 seconds). When unlocked, S-4000S channel settings
can be adjusted.
When the S-4000R is powered up, it will remember its last Lock mode state (locked or
unlocked).
When the S-4000R is in a locked state, you can still use the CHANNEL knob to select channels
whose signal level you want to monitor with the LED input meter.
Summary of Contents for RSS Digital Snake S-4000
