MIDI Implementation
18
3-2. MIDI Visual Control
Start Address
Description
10H 00H 00H
System Preference Area (See 3-2-1)
10H 10H 00H
Clip Control Assignment Area (See 3-2-2)
10H 30H 00H
Clip Control Preference Area (See 3-2-3)
* MVC messages are ignored if received while MVC is turned OFF.
* MVC messages (except MVC ON messages) are ignored if received while MVC is set to OFF (when in standard mode or V-LINK mode).
* The unit automatically switches to standard mode when MVC OFF is received.
* If MVC ON is received after reception of V-LINK ON, the unit changes from V-LINK mode to MVC mode.
* The settings executed using MVC messages are not saved to internal memory.
* Default MVC settings as follows.
Parameter
Assign
Value (status)
Clip Control Ch.
-
1
Color Control Ch.
-
1
Note Control
-
OFF
Transition Time
CC#05
0
Keyboard Range Lower
-
36
Keyboard Range Upper
-
84
* Send data divided into 2 parts for the address with “#”, upper nibble (upper 4 bits) and lower nibble (lower 4 bits).
Example)
If the data you are transmitting is BCH, send 0BH as the first byte, then send 0CH. When receiving, if the unit does not receive consecutive 2 byte, such data transmission
is ignored.
z
3-2-1. System Preference Area
Address
Parameter Name
Sys.Ex.Value
Meaning of Value
10H 00H 00H
MIDI Visual Control ON/OFF
00H–01H
OFF, ON
10H 00H 01H
Clip Control Rx MIDI Ch.
00H–10H
1–16 Ch., OFF
10H 00H 02H
Effect Control Rx MIDI Ch.
00H–10H
1–16 Ch., OFF
10H 00H 03H
Note Mode Enabled
00H–01H
OFF, ON
z
3-2-2. Clip Control Assignment Area
Address
Parameter Name
Sys.Ex.Value
Meaning of Value
#10H 10H 02H
Dissolve Time Ctrl Assign
01H-1FH, 40H-5FH, D0H, E0H, FFH
Transition Time: Control Change, After touch, Pitch Bend, OFF
z
3-2-3. Clip Control Preference Area
Address
Parameter Name
Sys.Ex.Value
Meaning of Value
10H 30H 02H
Keyboard Range Lower
00H–7FH
Note Number
10H 30H 03H
Keyboard Range Upper
00H–7FH
Note Number
