– 1 –
C5100025 1RCC
fig.Panel
1.
Mini Speaker
For the metronome’s beep sound only. If the
OUTPUT jack is being used, no sound is
output.
2.
[METRONOME] Button
Selects the metronome parameter.
3.
[START/STOP] Button
Starts and stops the metronome.
4.
PHONES VOLUME Knob
Adjusts the OUTPUT jack’s volume.
* The volume of the mini speaker is adjusted with CLICK
VOLUME.
5.
[COACH] Button
Selects the Coach mode.
6.
VALUE [+]/[-] Button
Use these buttons to change the values of
each parameter.
To increase the value rapidly, hold down [+]
and press [-]. To decrease the value rapidly,
hold down [-] and press [+].
7.
BEAT Indicator
Flashes along quarter notes.
Red indicator flashes on accent beats.
8.
Head
9.
Sensor
10.
Tuning Bolts
Adjusts the head tension.
Thank you, and congratulations on your choice of the Roland RMP-3.
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (on another
leaflet). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel
assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its
entirety. The manual should be saved and kept on hand as a convenient reference.
As shipped, the RMP-3’s battery is not installed. Please read “Preparations—Loading the Battery” and follow the
instructions to install the battery.
Copyright © 2005 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form
without the written permission of ROLAND CORPORATION.
Panel Description
1
2
4
5
3
7
9
10
8
6
RMP-3_e 1 ページ ２００５年１月１４日 金曜日 午前１１時１３分
