Roland RG-7 Owner'S Manual Download

Page: 47 / 124

Chapter 1. Playing Back Songs

Deleting Songs Saved to the

“Favorites” or USB Memory

This deletes songs saved to USB Memory (sold separately) and the “Favorites.”

If deleting songs saved to USB Memory, connect the USB memory device to the Ext

Memory port.

Press the [Function] (Exit) button so the indicator is lit.

Press the [Song] (Select -) button or [

] () button to display

the FILE screen.

fig.

Press the [Song] (Select -) button or [

] () button so “DEL”

(Delete) is flashing.

fig.

Press the [Moving Key] (Enter) button.

The following screen appears.

fig.

Press the [Song] (Select -) button or [

] () button so that the

“Saved Song to Delete” setting is flashing.

fig.

RG-7_e.book 45 ページ２００７年１２月２１日　金曜日　午前９時２４分

Summary of Contents for RG-7





























































































































Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands

Roland RG-7, Owner'S Manual

Search results

Summary of Contents for RG-7

Reviews:

Related manuals for RG-7

Brands by name

Popular brands