Roland RG-3 Owner'S Manual Download

Page: 18 / 124

Panel Descriptions

Jack Panel (RG-3’s Bottom Left Panel)

fig.00-020

AC Inlet

Connect the included power cord to this inlet (p. 19).

Pedal connector

Connect the pedal cord here (p. 19).

Input jacks

You can connect other sound generating devices or
audio equipment here and have their sound be played
through the RG-3’s speakers (p. 98).

Output jacks

These jacks can be connected to your audio system to
enjoy more powerful sound (p. 98).

Video Out jack

Connect a television here. This allows you to display
the Song Select screen, slide show, lyrics, and notations
on the connected television set (p. 47).

Ext Display connector

Connect a external display here. You can display the
Song Select screen, slide show, lyrics, and notations on
the external display (p. 45).

LCD Contrast knob

This adjusts the brightness of the front panel display (p.
23).

USB connector

You can connect a computer and exchange
performance data between the instrument and the
computer (p. 103).

MIDI In/Out connectors

Connect to external MIDI devices to exchange
performance data (p. 99).

10 Mic jack

Used for connecting microphone (p. 21).

11 Mic Volume knob

Adjusts the volume level for the microphone (p. 21).

12 Phones jacks

Connect the headphones here (p. 21).

7 8

10 11

Summary of Contents for RG-3





























































































































Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands

Roland RG-3, Owner'S Manual

Search results

Summary of Contents for RG-3

Reviews:

Related manuals for RG-3

Brands by name

Popular brands