![background image](http://html.mh-extra.com/html/roland/rad-99/rad-99_setting-manual_1479158001.webp)
Setting Manual
07-02-1
201a
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES.”
These sections provide important information concerning the proper operation of the unit.
The manual should be saved and kept on hand as a convenient reference.
202
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND
CORPORATION.
USING THE UNIT SAFELY
001
• Before using this unit, make
sure to read the instructions
below, and the Setting
Manual.
.......................................................................
003
• Do not attempt to repair the
unit, or replace parts within it
(except when this manual
provides specific instructions
directing you to do so). Refer
all servicing to your retailer,
the nearest Roland Service
Center, or an authorized
Roland distributor, as listed
on the “Information” page.
.......................................................................
013
• In households with small
children, an adult should
provide supervision until the
child is capable of following
all the rules essential for the
safe operation of the unit.
.......................................................................
014
• Protect the unit from strong
impact.(Do not drop it!)
.......................................................................
106
• Never climb on top of, nor
place heavy objects on the
unit.
......................................................................
116
• When assembling, be careful
not to allow fingers or other
areas to get pinched.
......................................................................
118a
• Should you remove screws,
keep them in a safe place out
of children’s reach, so there is
no chance of them being swallowed
accidentally.
......................................................................
291a
In addition to the precautions given in
“Using the Unit Safely” in this
manual, please also read and observe
the following:
Maintenance
401a
• For everyday cleaning wipe the unit
with a soft, dry cloth or one that has
been slightly dampened with water.
To remove stubborn dirt, use a cloth
impregnated with a mild, non-
abrasive detergent. Afterwards, be
sure to wipe the unit thoroughly with
a soft, dry cloth.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The
●
symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
IMPORTANT NOTES
●
Device carrier (with 4 screws attached)
fig.mount.eps
●
Rack carrier (left/right)
fig.bracket-l.eps
* Assembly requires a Phillips screwdriver (not included).
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
116
When assembling, be careful not to allow fingers or
other areas to get pinched.
1.
Remove the 4 screws from the device carrier.
2.
Arrange the device carrier and the rack mounting
hardware (left) as shown in the figure, and attach at
mounting hole A using one of the screws you removed.
3.
Attach at mounting hole B using one of the removed
screws. You can attach at any desired angle from 1 to 6.
4.
Arrange the device carrier and the rack mounting
hardware (right) as shown in the figure, and attach at
mounting hole A using one of the screws you removed.
5.
Attach at the same angle as the mounting hole used for
attachment in step 3.
6.
Secure a compatible device to the device carrier. For
more information, read the owner’s manual that came
with your device.
When mounting a compatible device on the device carrier, be
sure to secure it in place using the specified screws. Using
screws other than those specified may cause internal damage
to the equipment or result in inadequate mounting.
Check That All Items Were
Received
How to Assemble
Device carrier
Screw
Screw
Screw
Device carrier
Rack carrier (left)
A
Screw
1
2
3
4
5
6
B
B
Screw
Rack carrier (right)
Device carrier
A
Screw
Rack carrier (right)
Device carrier
1
2
3
4
5
6
B
B