25
Use As a Matrix Switcher
You can synchronize the operation of the MVS-12 with the V-1600HD and switch the output.
1.
Connect the source to the MVS-12.
Connect the source devices to VIDEO INPUT connectors.
2.
Connect the output from the MVS-12 to the V-1600HD.
Connect MATRIX OUT 1 on the MVS-12 to SD IN (channel 13) on the V-1600HD.
fig.V1600HD-remote.eps
3.
Connect the V-1600HD and the MVS-12 using MIDI.
Connect MIDI output from the V-1600HD to the MIDI IN connector on the MVS-12.
* Set the MIDI channels and device IDs to matching values, and set the MVS-12 to receive MIDI signals from the V-1600HD.
fig.MIDI-connect-V1600.eps
4.
Switch on V-LINK on the V-1600HD.
Use the menu on the V-1600HD to switch on V-LINK.
5.
Operate the V-1600HD.
Hold down PST/EFFECT [13] and press a PGM button from [1] to [12]. This switches the source for channel 13 on the V-1600HD.
PGM buttons [1] through [12] correspond to VIDEO INPUT 1 through 12 on the MVS-12.
fig.switch-on-V1600HD.eps
Synchronizing with Operation of the V-1600HD
MVS-12_e.book 25 ページ ２０１１年３月９日 水曜日 午後２時３３分
Summary of Contents for MVS-12
Page 39: ...For China MVS 12_e book 39...
