15
Connecting External Equipment
When you’re using the unit as a matrix switcher, connect projectors, recorders, and other such equipment to the MATRIX OUT
connectors. The output from the MATRIX OUT connectors is NTSC or PAL.
fig.projector-recorder.eps
Switch off the power to the MVS-12 and connect a commercially available PS/2 mouse to the MOUSE connector on the front
panel. After making the connection, switch on the power to the MVS-12.
When using a mouse, be sure to connect it before you switch on the power to the MVS-12. The mouse might fail to operate
correctly if connected after powerup.
fig.mouse-connection.eps
You can use the mouse to perform following operations instead of using the buttons on the front panel.
• When using the unit as a multi-viewer
You can switch the display mode.
You can move the location where video is displayed by dragging it to the location you want.
• When using the unit as a matrix switcher
While viewing the input video, you can select the source to output to MATRIX OUT by left-clicking it.
Connecting Projectors or Recorders
Connecting a Mouse
MVS-12_e.book 15 ページ ２０１１年３月９日 水曜日 午後２時３３分
Summary of Contents for MVS-12
Page 39: ...For China MVS 12_e book 39...
