manualshive.com logo in svg

Roland MV-8000, Quick Start Manual, Page: 28 / 32

Share
Download
Roland MV-8000 Quick Start Manual Download Page 28

 

28

Assembling additional materials

 

5

 

Set parameters in the QUICK 
ASSIGN screen.

 

(Example) To assign the sample to separate pitches F3 through E4

 

6

 

Press  

(Set).

 

The sampled sound will be assigned to the 
pads. Assign the patch to the current 
track, and play it as described in Using the 
velocity pads (p. 13).

 

You can import sample data that was created for the Roland S-700 series or the Akai 
MPC-2000(XL).

Parameter and setting

Result

Make Keyboard 
checked (keyboard 
mode)

This assigns the sample in a scale of semitone steps 
around the Original Key.

Original Key= C4 etc.

With a setting of C4, note number C4 will sound the 
sample at the same pitch as when it was recorded.

Assign To= F3–E4

This assigns the sample over the range F3 through E4.

You can use [F1 (Name)] to 
write or edit the name. For 
details on inputting a name, 
refer to Inputting text (p. 9).

For details on other 
parameters, refer to Owner’s 
Manual p. 359.

QuickStart_e.book 28 ページ ２００５年４月２８日　木曜日　午後９時３５分

Summary of Contents for MV-8000

































Reviews:

No comments