Roland MV-8000 Quick Start Manual Download Page 24 | Manualshive

Page: 24 / 32

Roland MV-8000 Quick Start Manual Download Page 24

24

Assembling additional materials

Here's how you can collect materials (samples) in addition to those already
saved on the hard disk, and use them in a composition that's uniquely your
own.

Importing sounds from a sampling CD-ROM

You can import files (sample data) from commercially-available sampling
CD-ROMs and use them as patches. As an example, here's how to create a
drum-type patch that is ideal for assigning different percussion instrument
sounds to each pad.

●

Preparations

Perform the following procedures.

• Preparing your equipment and making

connections (p. 4)

• Connecting the power (p. 5)

• Turning on the power (p. 6)

1

Insert your sampling CD-ROM
into the CD-R/RW drive.

Prepare to load data from the CD-ROM.
There are several points that you must
observe when inserting a disc into the CD-
R/RW drive. For details, refer to Owner’s
Manual p. 129, and insert the disc as
directed.

2

Press

and then

(Patch).

The IMPORT (PATCH) screen will appear.

3

Press

(Drive Select) and

then select “CD-ROM.”

4

Use the cursor to select the file
you want to import, and press

(Execute).

The file highlighted by the cursor will be
imported. The Quick Assign (Patch)
screen will appear.

Drum-type patches are
suitable when you want to
assign a different type of
sound to each pad (note
number). For example you can
create a patch that contains
kick, snare, tom, and cymbal
sounds etc. as a single “drum
set.”

The included CD-ROM
contains the same materials
that are already loaded into the
MV-8000's hard disk when it is
shipped. (I.e., it is a backup
disc.)

To import a file from the CD-
R/RW drive, press
[F1 (Select Drive)] and select
the drive from which you want
to import.

To audition (preview) the
sound before importing it,
press [F4 (Preview)].

If you want to automatically
detect and divide the sample at
regions of silence and assign
each slice to a pad, turn on the
Auto Divide setting. To make
this setting, go to the IMPORT
(PATCH) screen, press
[MENU] - Import Options -
[ENTER] to access the
IMPORT OPTION popup, and
check the Auto Divide setting.

QuickStart_e.book 24 ページ２００５年４月２８日　木曜日　午後９時３５分

«
...
22
23
24
25
26
...
»

Summary of Contents for MV-8000

































Reviews:

No comments