Roland Music ATELIER AT75, Owner'S Manual

Page: 93 / 144

91
Record and Playback Your Performance
Record and Playback Your Performance
4.
Press the Value [-] [+] buttons to select the
performance song that you wish to load into
internal memory.
5.
Press the [Load] button.
The selected performance data will be loaded into
internal memory.
If loading is canceled because the memory limit has been
reached, the following message will be displayed:
fig.E-30.eps
If the following screen appears
If the performance song in the ATELIER has not been
saved to a USB memory or Favorites (User memory), the
following message appears.
fig.E-62.eps
If you wish to erase the performance song
1.
Press the [Rec] button.
If you don’t wish to erase the performance
song
1.
Press the [Reset] button to stop the Save
operation.
Save the song to USB memory or a floppy disk (p. 89).
You can delete a performance song that was saved onto a
“Favorites,” USB memory, or floppy disk.
If you want to delete a song in USB memory, connect your
USB memory to the External Memory connector before you
continue.
If you want to delete a song in floppy disk, connect the floppy
disk drive to the External Memory connector, and insert a
floppy disk into the drive.
1.
Press the [Song] button (confirm that its
indicator is lit).
The Song Select Screen appears.
2.
Press the [Media] button to select the media.
If you want to delete a song from the “Favorites,” choose
“Favorites.”
If you want to delete a song from USB memory, choose
“Ext Memory.” If you want to delete a song from floppy
disk, choose “Disk.”
3.
Press the Value [-] [+] buttons to select the
performance data that you wish to delete.
Deleting Performance Songs
Stored on “Favorites” or the
USB Memory
3
4
2 1
5
AT-75_e.book 91 ページ ２００８年８月２１日 木曜日 午前１０時９分