Roland Music ATELIER AT75 Owner'S Manual Download

Page: 75 / 144

Adding Various Effects to a Voice

The ATELIER allows you to apply various effects to the sounds you play from
the keyboard.

Harmony appropriate for the chord you play in the lower keyboard can be
added to the highest note played in the upper keyboard. This function is called
“Harmony Intelligence.”

When you press the [Harmony Intelligence] button, the voice most suitable for
the selected harmony intelligence will be selected automatically.

Press the [Harmony Intelligence] button (indicator lights).

Each time you press a [Harmony Intelligence] button, the indicator will
alternate between ON (lit) and OFF.

fig.04-01

Adding Harmony to a Melody (Harmony Intelligence)

AT-75_e.book 73 ページ２００８年８月２１日　木曜日　午前１０時９分

Summary of Contents for Music ATELIER AT75

















































































































































Search results

Summary of Contents for Music ATELIER AT75

Reviews:

Related manuals for Music ATELIER AT75

Brands by name

Popular brands

Roland Music ATELIER AT75, Owner'S Manual

Search results

Summary of Contents for Music ATELIER AT75

Reviews:

Related manuals for Music ATELIER AT75

Brands by name

Popular brands