Roland Music ATELIER AT75, Owner'S Manual

Page: 45 / 144

43
Using the Rhythm Performance
Using the Rhythm Performance
There are two ways to start the Rhythm. You can press the [Start/Stop] button
to start the Rhythm, or you can use Sync Start to have the Rhythm start when
you play the lower keyboard or the pedalboard.
You can also make the Rhythm start with an intro, or stop with an ending.
fig.02-03_AT-900.eps
Starting with an Added Intro
1.
Press the [Intro/Ending] button.
2.
Press the [Start/Stop] button.
The Intro is played and the Rhythm starts.
While the Intro is playing, the [Intro/Ending] button indicator will light, until
the Intro ends then the button indicator will go dark.
Starting Without an Intro
1.
Press the [Start/Stop] button.
The Rhythm starts without an Intro being played.
Making the Intro Short and Simple
1.
Press the Variation [1] button.
2.
Press the [Intro/Ending] button.
The [Intro/Ending] button indicator will light.
3.
Press the [Start/Stop] button.
A short Intro is played and the Rhythm starts.
Playing Rhythm
Starting at the Press of a Button
The functions of the [Intro/
Ending] button and [Start/Stop]
button can be assigned to the
foot switches located on each
side of the Expression Pedal (p.
70).
For more on the Variation
buttons, refer to “Adding
Variety to the Rhythm or
Automatic Accompaniment” (p.
48).
AT-75_e.book 43 ページ ２００８年８月２１日 木曜日 午前１０時９分