Maintenance
42
Replace Consumable Parts
Replace liquid material vat
The liquid material vat must be replaced with a new one in the following situations:
•
If the bottom of the liquid material vat has turned completely cloudy
•
If the bottom of the liquid material vat (silicon material) is scratched or cracked
•
If the job does not attach to the printing platform during printing and remains in the liquid material vat
Replace printing platform
If the surface of the printing platform is scratched or the job remains in the liquid material vat, it is recommended to replace the printing platform with a new one.
Contact Roland DG Corp. or the authorized Roland DG Corp. dealer from whom you purchased the machine.
Replace the projector
The light source of the machine’s built-in projector (UV LED) is a consumable part.
When a fixed usage time is exceeded, a message is displayed in monoFab Player AM. In this event, it is recommended that the projector be replaced as soon as
possible. Contact Roland DG Corp. or the authorized Roland DG Corp. dealer from whom you purchased the machine.
Summary of Contents for monoFabARM-10
