46
MDX-50
Cuttable material
Resins such as chemical wood and modeling wax (metal not supported)
Operating range
X, Y, Z: 400 × 305 × 135 mm (15.8 × 12.0 × 5.3 in.)
Loadable workpiece size
X, Y, Z: 400 × 305 × 100 mm (15.8 × 12.0 × 3.9 in.)
Axis drive system
Stepping motor
Operating speed
X, Y: 7 to 3600 mm/min (0.3 to 141.7 in./min)
Z: 7 to 3000 mm/min (0.3 to 118.1 in./min)
Software resolution
0.001 mm/step (0.039 mil/step; RML-1)
0.001 mm/step (0.039 mil/step; NC code)
Mechanical resolution
0.01 mm/step (0.39 mil/step; half step)
Spindle motor
Brushless DC motor
Spindle rotation
4500 to 15000 rpm
Number of tools housed
6 (However, one tool is also used as the detection pin.)
Attachable tool
mm
specifica-
tions
Shank diameter: 6 mm, tip diameter: 6 mm or less, length:
30 to 90 mm
* Tools with shank diameters of 3 mm or 4 mm can be
used by installing them in the included tool holder.
inch
specifica-
tions
Shank diameter: 0.25 in. tip diameter: 0.25 in. or less, length:
30 to 90 mm (1.18 to 3.54 in.)
* Tools with shank diameters of 0.125 in. can be used by
installing them in the included tool holder.
Interface
USB
Control command sets
RML-1, NC code
Power requirements
AC 100 to 240 V ±10%, 50/60 Hz (overvoltage category: II, IEC 60664-1)
1.2 A
Power consumption
Approx. 95 W
Operating noise
During operation: 60 dB (A) or less (when not cutting)
During standby: 45 dB (A) or less
External dimensions
Width × depth × height: 760 × 900 × 732 mm (29.92 × 35.43 × 28.82 in.)
Weight
122 kg (269 lb.)
Installation environment
Indoor use at altitudes up to 2000 m
Temperature: 5 to 40°C (41 to 104°F)
Humidity: 35 to 80%RH (no condensation)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage: 1440 V
Long-term temporary overvoltage: 490 V
Included items
Power cord, USB cable, manual, Roland DG Software Package CD, detection
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool
positioner, Z0 sensor, etc.
System Requirements for USB Connection
Computer
A model preinstalled with Windows 10, 8.1, or 7 (32 or 64 bit) or an upgraded com-
puter originally preinstalled with Windows 7 or later
USB cable
Use the included USB cable.
Specifications
